Specially formulated to break down metallised emulsion polish.
Fast-acting formulae.
Ideal for use with scrubbing machines.
Surfactants used are biodegradable and phosphate-free.
Solvent-free.
PROPERTIES: SPECIFICATION:
Appearance @ 20 °C Red, clear, slightly viscous liquid
Odour Mild, characteristic
pH (neat) 14
Specific Gravity @ 20oC 1.038 +/-0.005
Flammability Non-flammable
DIRECTIONS FOR USE:
Dilute 1 part FLOORSTRIP with 10 parts of clean water.
Mop this diluted solution liberally onto a section of the floor that is to be stripped.
Soak for 10 minutes, then scrub with a slow-speed machine. (Work on a small area at a
time so that the solution does not dry before it is removed).
Mop or wet vacuum the polish slurry from the floor.
Repeat this operation until the floor is completely stripped.
Rinse thoroughly with water. (A little vinegar may be added to the water to neutralise
the slurry).
Allow to dry before applying polish.
If the floor has not been stripped for some time, there is a considerable thickness of
polish, or you are restricted by time to strip the floor, it is recommended to use ULTRA
FLOORSTRIP - Rinse Free Floor Polish Stripper.
